- Wheel Parts[2]
- Auto Bearing[10]
- Other Auto Parts[10]
- Needle Bearings[10]
- Deep Groove Ball Bearings[10]
- Rod End Bearings[10]
- Taper Roller Bearings[10]
- Thrust Ball Bearings[8]
- Auto Clutch[9]
- Flanges[1]
- Other Bearings[8]
- Special Bearings[2]
- Spherical Roller Bearings[2]
- Linear Bearings[9]
- Pillow Block Bearings[10]
- Angular Contact Ball Bearings[10]
- Cylindrical Roller Bearings[9]
- Self-aligning Ball Bearings[6]
- Forklifts[1]
- Universal Joints[8]
- Pipe Fittings[1]
- Bearing Rollers[4]
- Sliding Bearings[1]
- Transmission Chains[10]
- Contact Person : Mr. Zhou Bright
- Company Name : Shaanxi Fortune Trade Co., Ltd.
- Tel : 86-29-86528771
- Fax : 86-29-86515056
- Address : Shaanxi,Xi'an,A-1007 FENG HUANG XIN CHENG NO.10 FENG CHENG THIRD ROAD XI'AN SHAANXI
- Country/Region : China
- Zip : 710018
Linear Motion Ball Bearings LME series Built-in Synthetics Resin Retainer
Linear motion ball bearings
Structure:
The Linear Motion Bearing consists of an outer cylinder, ball retainer, balls and two end rings. The ball retainer which holds the balls in the recirculating trucks in held inside the outer cylinder by end rings. Those parts are assembled to optimize their required functions. The outer cylinder is maintained sufficient harness by heat treatment, therefore it ensures the bushings projected travel life and satisfactory durability. The ball retainer is made from steel or resin. The steel retainer has high rigidity obtained by heat treatment. The user can select the optimum type for meeting the users service conditions.Features:
1 High Precision and Rigidity
The Linear motion bearing is produced from a solid steel outer cylinder. Also the linear motion bearing incorporates either a patented all steel hardend seamless ball retainer or an industrial strength resin retained.
2 Ease of Assembly
The standard type of linear motion bearing can be loaded from any direction. Precision control is possible using only the shaft supporter, and the mounting surface can be machined easily. We also provides a variously of housings for all types of slide bushings, offering convenience of design and assembly.
3 Ease of Replacement
Linear motion bearing of each type are completely interchangeable because of their standardized dimensions and strict precision control. Replacement because of wear or damage is therefore easy and accurate.
4 Variety of Types
We offers a full line of linear motion bearing: the standard, integral single-retainer closed type, the clearance adjustable type and the open, double-retainer, and flanged types. The user can choose from among these according to the application requirements to be met.
LME…UU(Resin retainer) This type is a metric dimension series generally used in Europe.
Linear Motion Ball Bearings LME series Built-in Synthetics Resin Retainer
